This method can cure almost any flash issues, such as can not be formatted, zero volume property, write protected, restored fake flash, etc.
There are several stages in the flash reprogramming
1. Finding out the identity of the VID and PID flash
2. Looking for a flash based tool VID PID was
3. Reprogram the flash with a tool before
1. Finding out the identity of the VID and PID flash
VID is the information about the vendor of flash, while the PID controller is the information on the chip used the flash. PID value that will determine the software / tools that are appropriate for use in our flash.
2. Looking for a flash based tool VID PID
Now the next question, where and what programs are used to tamper with the controller chip?
Source tools like this exist in China in Mydigit.cn (as many fake flash coming from china)
To download on this website should be a member of where we need to get "invitations" from other members well now look at the website of the software specifically for Solid State System chip to chip number SSS6690/SK6211 (look in the Files)
will there are many types of controller chip vendors, we entered into SSS, search and download SSS6690/SK6211
So software in particular has been found, 
3. Reprogram flashdisk
To view the workings of the software and controller chip is different from one another, the following is only an example to model SSS6690 alone, sometimes to use this software you must first install the manufacturer drivers (included in software)
The first thing to note is to make sure that the flash drive detected by software
after that go to setup and use / select settings default (if there is no default choice, and you do not know how to set this section, it is advisable to stop first, do not proceed because it can have a negative impact on the flash) after selecting the default settings and click ok click start / format, and wait until the flashing process is complete 
